6 Best Ways You Can Use to Open A Stuck Drawer
Several factors can make the drawers get sticky and become difficult to open. It can be because of faulty or worn-out runners, or unevenness at the sides of the drawers, or any number of other reasons. However, the good news is that you can fix the drawers and get them running like usual. Here are a couple of ways for you to fix and open a stuck drawer. 1. Get the Rails Lubricated Undamaged cleats and rails slide better when they are periodically lubricated. You need to rub them with a bar of soap. You can also use bee's wax or candle wax if they are wood and go for WD-40 if they are metal. Now, push the drawer out and in several times until the drawer starts smoothly sliding. There is another quick fix: try and put thumb tacks on the drawer runners to have it built up. Moreover, if you turn the screw with only your fingers, the hole would be stripped. 2. Start Sanding the Rails If the simple case of lubricating the rails does not work, move on to sanding the rails. For a more drastic action, use medium-grade sandpaper on the wooden rails for removing any minor obstacles or burrs that might be present. Make sure to do it lightly and then test your drawer by pushing it out and in after sanding it only a little bit. If the drawer runners do not give you any more trouble, keep the sandpaper away and get the edges sealed with paint, varnish, or a wood sealer to ensure that it does not absorb moisture. When the drawer is out, lubricate the guides and rails on your modular furniture. After you are done sanding, use bee's waxes or candle wax for lubrication. 3. Check for Defects in the Drawer You do not need to be a sleuth to spot missing, split, cracked, or worn wooden rails. However, you should also check the fitting furniture to know whether it is damaged, the screws are loose or missing, or the screws have stripped the wood and enlarged the holes. When the rails are made of plastic or metal, you should look for obstructions, loose hardware, and cracks in plastic or dents in metal. 4. Realigning the Side Rails If the wooden rails are out of alignment, you require recessed screws, a screwdriver, wood filler, wood glue, and a small square. Follow these steps to fix the channel for drawer:
5. Reglue Split and Cracked Pieces In case the wood is split or cracked, you require carpenter's glue, weights, a screwdriver, a C-clamp, and a vice to hold the material in place. Your drawer will not get stuck like before ever. 6. Upgrade the Drawer Runners The other viable solution to the issue is to upgrade your drawer runners. You can upgrade the runners from top brands like Blum to say goodbye to stuck drawers forever. Besides, these runners will not need any sanding or waxing to get them to start working. A win-win situation for you, right? The Endnote There is no reason to worry about stuck drawers anymore because you now know multiple ways to fix the issue. Try the first five ideas to fix the drawers, and if none of them works, go ahead and change the runners to get new ones.
0 Comments
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
February 2022
Categories |